These are NEW circuit boards to replace worn or broken controller pcbs for the NES which include the standard rectangle NES controller and also the Dog Bone controller of the NES Toploader. They have gold contact pads so they will not oxidize easily and have a newer lower profile surface mount 4021 Shift Register chip, these work identically to the stock chip on the OEM controller. These boards have been tested by speed runners and the results are they work exactly like a stock controller.
If you want a blank board without the 4021 chip I do have boards without those presoldered on, in case you want to use one you salvaged from the OEM controller just send me an email. I do not think there will be much interest in these without the chip presoldered so I will offer them to who asks.
The Dog Bone controller PCB can use the socket from the original pcb but the pitch is off on my pcb but if you spread the pins out you can solder the socket onto the new pcb as shown in the image below, otherwise you will have to solder the wires onto the pcb as shown in the image gallery above.
Weight
N/A
Item
Dog Bone NES, Standard NES
Join WaitlistWe will inform you when the product arrives in stock. Please leave your valid email address below.
